Zinc Powder Spraying With Flame Control Cutting Torch With Gas Flashback Arrestor LT-PJ-01 manufacturer from China Wuxi Longteng Welding And Cutting Equipment Co., Ltd.,

Zinc Powder Spraying With Flame Control Cutting Torch With Gas Flashback Arrestor

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: LT-PJ-01

Zinc Powder Spraying With Flame Cutting Torch With Gas Flashback Arrestor

Zinc Powder Spraying With Flame Cutting Torch With Gas Flashback Arrestor

1) Quick Detail:

1. 250mm cutting torch,32mm powder spraying and marking device

2. Digital control cutting torch with powder spraying and marking device

3. For CNC flame cutting machine

2) Description:

1. The powder spraying device has 4 gas inlet channels among which 3 are for oxygen, 1 for Fuel gas. Two outermost channels, one is for preheat oxygen, the other is for Fuel gas; The middle one is for cutting oxygen; By which it is for powder spray.

2. Firstly, screw off knurled nut, put zinc powder into storage tank and screw on the nut.

3. Secondly, ignite powder spray device, adjust cutting oxygen, open the value of powder spray gas channel, then zinc powder will be automatically sprayed onto the plane.

4. It is applicable to digital-control cutting machine of different series. It is melts zinc powder inside storage tank with flame and spray it onto the steel plate according to design, then along the zinc powder line cutting machine conducts cutting with digital-control cutting torch. The width of the line is 0.5mm, which is adjustable.

5. Machine Use Digital Control Cutting Torch is suitable for use in digital control flame cutting machines, and is used to connect the cutting nozzles/tips, cutting steel and other metal materials. Cutting Torch is the main tool of gas cutting machine, also known as the torch. The fuel gas and oxygen mixture in the cutting torch, in the form of heat and has a preheating flame shape, in center of the preheating flame, the high pressure oxygen flow is injected for flame cutting work.

6. During the cutting process, an oxy-fuel cutting torch is used to heat metal to its kindling temperature, and each cutting torch has three valves to control the gas, two blue valves for oxygen, one red valve for fuel gas. From Left to Right for each is the preheating oxygen, the cutting oxygen, the fuel gas.

7. The torch needs to match with the cutting tip for cutting, and the different type of cutting tip uses for cutting different thickness of the steel plate. According to different height of the CNC flame cutting machine, the clients will choose the different length oxy-fuel cutting torch.

3) Competitive Advantage:

1> Product Advantage:

1. Adopt the isobaric preheating, use the zinc powder spraying more than 200 mesh, can be continuous powder spraying and marking, clear line, compact structure, strong and durable.

2. Suitable for automatic equipment and perform the various of complex graphic.